Changing a garbage disposal might seem hard. But with some guidance, you can do it yourself. This guide will show you how.
Credit: m.youtube.com
:max_bytes(150000):strip_icc()/garbage-disposal-installation-1824830-hero-1dcd7b5b05d44a2cb367e31692500c8c.jpg)
Credit: www.thespruce.com
Tools and Materials Needed
- Screwdriver
- Plumber’s Putty
- Wrench
- Bucket
- New Garbage Disposal
- Safety Glasses
- Work Gloves
Step-by-Step Guide
1. Turn Off Power
First, turn off the power. Find the circuit breaker and flip the switch. This will keep you safe from electric shocks.
2. Disconnect The Drain Lines
Next, disconnect the drain lines. Place a bucket under the pipes. This will catch any water that spills out. Use a wrench to loosen the nuts.
3. Remove The Old Disposal
Now, remove the old disposal. Look for the mounting ring. Use a screwdriver to turn it. The disposal will come loose. Carefully take it out and set it aside.
4. Prepare The New Disposal
Prepare the new disposal. Apply plumber’s putty to the flange. This will create a watertight seal. Attach the flange to the sink.
5. Connect The New Disposal
Now, connect the new disposal. Lift it into place. Align it with the mounting ring. Turn the ring to secure it. Use a wrench if needed.
6. Reconnect The Drain Lines
Reconnect the drain lines. Attach the pipes to the new disposal. Tighten the nuts with a wrench. Make sure everything is secure.
7. Restore Power
Turn the power back on. Go to the circuit breaker and flip the switch. Test the new disposal. Run some water and turn it on. Check for leaks. If everything works, you are done!
Tips and Warnings
- Always turn off the power before you start.
- Wear safety glasses and gloves.
- Have a bucket ready to catch any water.
- Check for leaks after you finish.
Common Problems and Solutions
| Problem | Solution |
|---|---|
| Disposal won’t turn on | Check the power connection. Make sure it is plugged in. |
| Leaking disposal | Check the connections. Tighten any loose nuts. |
| Disposal is noisy | Make sure there is nothing stuck inside. |
Frequently Asked Questions
How To Turn Off Garbage Disposal Power?
Ensure the power is off by unplugging it or switching off the circuit breaker.
What Tools Needed To Change Garbage Disposal?
You’ll need pliers, a screwdriver, plumber’s putty, and a wrench.
How To Remove Old Garbage Disposal?
Disconnect the power and plumbing, then unscrew and detach the unit.
How To Install New Garbage Disposal?
Connect the new unit to power and plumbing, then secure it in place.
Conclusion
Changing a garbage disposal is easy with the right tools and steps. Follow this guide, and you can do it yourself. Save money and learn a new skill. Happy fixing!